Cleaning The Mower - EGO POWER MOWER LM2120E Bedienungsanleitung

WARNING:
EN
replacement parts. Use of any other parts may create
a hazard or cause product damage. To ensure safety
and reliability, all repairs and replacements should be
performed by a qualified service technician.

CLEANING THE MOWER

The underside of mower deck should be cleaned after each
use, as grass clippings, leaves, dirt and other debris will
accumulate.
Remove any build-up of grass and leaves on or around
the drive shaft (only LM2120E-SP) and the motor fan (do
not use water). Wipe the mower clean with a damp cloth.
REMOVING/INSTALLING THE BLADE
WARNING:
heavy gloves or wrapping the cutting edges with rags or
other materials when performing any maintenance on
the mower blade. Always remove the battery pack when
servicing or transporting the mower.
◾
To Remove the Blade
Following Fig. T.
NOTICE:
loosening the bolt, turn the fan by hand to align the
through holes in the fan with the holes in the blade,
and place another metal rod into the aligned holes
(Fig. U).
◾
To Install the Blade
Following the assembly sequence in Fig. V , with the
fan blade towards deck and the printed blade side
towards outside, align the through holes in the fan with
the holes in the blade (Fig. W) and then tighten the
blade as Fig. X shown.
Fig. U & V parts description see below:
U-1 Stabilizer 1
U-2 Stabilizer 2
U-3 14mm Wrench
V-1 Fan
NOTICE:
blade bolt is 49-59Nm.
STORING THE MOWER
◾
Remove the battery pack from the mower and store it
in a cool, dry and clean location. Do not store it next to
corrosive materials, such as fertilizer or rock salt.
◾
Store the mower in a covered, enclosed space, that is
cool and dry and out of the reach of children.
14
Downloaded from www.Manualslib.com
When servicing, use only identical
Always protect your hands by wearing
If the bolt rotates with the motor shaft when
V-2 Inner Flange
V-3 Blade
V-4 Outer Flange
V-5 Bolt
The recommended torque for tightening the
56 VOLT LITHIUM-ION CORDLESS MOWER — LM2120E / LM2120E-SP
manuals search engine
◾
Do not cover the lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the mower,
which causes rust and corrosion.
◾
The mower can be stored upright or flat. (Fig. Y).
WARNING:
If the mower begins to tip over from the
upright position, mower damage or personal injury may
result. Always keep the mower stable and out of the reach
of children when it is in the upright position. If possible,
lay it flat for storage.