Philips Norelco OneBlade QP2531 Handbuch Seite 14

ENGLISH
14
Problem
The appliance doesn't
cut hairs anymore.
The appliance makes a
strange noise.
The appliance doesn't
function optimally.
anymore.
Possible cause
The blade is blocked by dirt. Switch on the appliance and rinse the blade
The blade is placed on the
handle incorrectly.
The blade is damaged
or worn.
The blade is damaged
or worn.
The blade is placed onto
the handle incorrectly.
The blade is blocked by dirt. Remove the blade and clean it thoroughly.
The blade is blocked by dirt. Remove the blade and clean it thoroughly.
The blade is subject to
wear and therefore its
performance decreases
over time.
The blade is a delicate part
of the appliance and can
easily be damaged. If the
blade is damaged, it may not
function optimally anymore.
Solution
under the tap with warm water.
Hold the blade in a cup with warm water
(60°C and no hotter) for approx.30 seconds.
Push the blade onto the appliance until you
hear a click.
Replace the blade with a new one.
See chapter 'Replacement'.
Replace the blade with a new one.
See chapter 'Replacement'.
Remove and reattach the blade. Push it onto
the appliance until you hear a click.
Replace the blade with a new one.
See chapter 'Replacement'.
Replace the blade with a new one.
See chapter 'Replacement'.