COBJECT SMOCKEO Handbuch Seite 8

SMOCKEO is a connected smoke detector that uses a low-bandwidth network
EN
(radio communication device) to warn you. The SMOCKEO detectors communicate
with each other and inform you, according to your preferences, in case of dysfunction:
Smoke alert, Detector removed from its mounting bracket, Long-range communication
failure, and Local loop communication failure, between your detectors, Electrical or
dark chamber dysfunction, Battery level, «tested detector» alert.
Your SMOCKEO detector, 2 x mounting screws and 2 pegs, 1 x mounting bracket, 1 x
ALKALINE 9V battery (DURACELL MN1604, EVEREADY 522, or GP1604A) for the smoke
detector.
Requirement: To access all features of the SMOCKEO connected detector, check
the availability of the SIGFOX network in the building to be equipped. Please find this
information on our website: www.smockeo.com/network.
CONNECT SMOCKEO IN A
COUPLE OF SECONDS!
Remove the SMOCKEO
detector from its mounting
bracket.
On the back of the detector,
you will find its unique serial.
1. From www.smockeo.com/activation
Simply enter the activation serial and your alert preferences.
That's it, no network configuration is required: nothing simpler!
2. With the QR Code
Without even downloading the mobile application, scan the QR Code and indicate
your alert preferences. Ideal if you are in a hurry!
3. From your App Store or Google Play
Download the SMOCKEO application on your mobile and follow the steps!
YOUR BOX CONTAINS :
FOR STARTERS
QR code for
Smartphone
activation
A CHOICE OF 3 WARNING METHODS
ACTIVATION KEY
COBJECT 5 route de Guewenheim,
Scan me to
F68520 BURNHAUPT LE HAUT
activate me !
9V Alkaline Battery : DURACELL MN1604,
EVEREADY 522 or GP 1604A
Autonomy : 5 years
After every battery change proceed with
a functioning test (see manual). Read
the operation manual carefully (www.
smockeo.com).
Smoke detector to be replaced preferably
before : 2026
Activation
key