Expert Settings; Replacing The Battery - weinor BiEasy 15M Go! Bedienungsanleitung

4.6.6 Expert settings

4.7
80 | EN
Downloaded from www.Manualslib.com
Deleting all transmitters from the receiver
1. Simultaneously engage theSTOP button, the program-
ming P button (on the rear of the device) as well as the
UP button and the DOWN button.
2. Hold this button combination for approximately 6 seconds.
The status display lights up orange-green briefly twice,
followed by red.
The channel in the transmitter (or the group) is also deleted.
DIP switch 1 and 2 on the rear of the device, beneath the
cover: OEM settings

Replacing the battery

Important:
Replace batteries only with batteries of
identical type.
1. Unscrew the device at the bottom with a suit-
able tool and loosen the cover.
2. Remove the batteries.
3. Insert the two new identical LR 06 (AA) batteries in the
correct position (pay attention to the polarity).
4. Replace the cover and connect to the device using the
screw.
Abb. 5 Changing batteries with the BiEasy 15M Go!
Ⓒ weinor GmbH & Co. KG
manuals search engine