Switching On Mode; Settings For All Channels - Medion md 30022 Bedienungsanleitung

S O M
WITCHING N
You can establish your preferred Operating Mode of the TV after switching it on with this
setting.
1. Press the MENU Button to reach the Main Menu.
2. Select the INSTALLATION Menu Point with the
Button again.
3. Move the Selection Bar to the SWITCH ON WITH Menu Point with the
tons. Now, you will be able to choose between the PC/CH 1/LAST CH/AV/INSTALLATION
modes of operation by means of the
Button (Menu).
PC: Switch it on in the PC operating mode used most recently (VGA or HDMI)
CHANNEL 1: Switch on with channel slot 1
LAST CHANNEL: Switch on with the channel most recently viewed.
AV: Switch on with AV setting most recently used.
INSTALLATION: Switch on as at the status of the initial installation – see chapter „6.
APSAS First Time Installation"on page 10.
S
ETTINGS FOR ALL CHANNELS
1. Press the MENU Button to reach the Main Menu.
2. Select the INSTALLATION Menu Point with the
Button again.
3. Select the SETTING ALL CHANNELS Menu Point with the
the MENU Button again.
4. Sharpness Setting:
This function sets the sharpness setting for all channels. You can choose between set-
tings 0-3 through a Menu by pressing the MENU Button. There is a more detailed de-
scription of this function in chapter „Additional picture settings" on page 15.
5. Noise Reduction Setting:
This function sets the noise reduction setting for all channels. You can choose between
the AUTOMATIC/ OFF/ WEAK/ MEDIUM/ LOUD settings through a Menu by pressing the
MENU Button.
You will find a more detailed description of the settings in chapter „Additional picture
settings" on page 15.
Decoder Setting:
6.
This function sets the decoder function for all channels. You can choose between the
OFF/ EXTERNAL/ INTERNAL SOUND/ EXTERNAL SOUND/ INTERNAL SOUND settings
through a Menu by pressing the MENU Button.
You will find a more detailed description of the settings in chapter „Setting channels
manually" on page 20.
ODE
VOL-/VOL+ Button, or by pressing the MENU
Settings of all programs
1. Sharpness setting
2. Noise reduction setting
3. Decoder setting
1 1 2 2 . . C C
O O M M F F O O R R T T
P+/P- Buttons and press the MENU
P+/P- Buttons and press the MENU
P+/P- Buttons and press
F F
U U N N C C T T I I O O N N S S
P+/P- But-
33