Medion md 30022 Bedienungsanleitung Seite 33

AUTO:
Your TV device will recognize the type of signal at the VGA or HDMI socket automatically.
PC:
In this setting, your TV device will expect an input signal at the VGA or the HDMI
socket from the video display adapter of your PC. Please pay attention to the correct
selection and setting of your video display adapter.
VIDEO:
In this setting, your TV device will expect an input signal at the VGA or the HDMI
socket from a source of video. Please pay attention to the correct selection and set-
ting of the output of your source of video.
Note: The TV device is equipped with an automatic, complex recognition of the type of
signal and the source of the signal. However, incorrect identifications can arise because
of different tolerances of the source of your signal. Use the manual settings for the input
in this case.
4. Horizontal position:
You can change the horizontal position of the image from the VGA or the HDMI socket
with the VOL+/VOL- Buttons.
5. Width:
You can change the width of the image from the VGA or the HDMI socket with the
VOL+/VOL- Buttons.
6. Vertical position:
You can change the vertical position of the image from the VGA or the HDMI socket with
the VOL+/VOL- Buttons.
7. Phase:
You can optimize the presentation of text on the TV device (e.g. in the case of quivering
letters) and compensate for possible disruptions to the image (disruption in the picture
or wave lines) with the
8. Frequency:
Possible disruptions to the image (disruption in the picture or wave lines) can be com-
pensated for with the
the case of problems.
9. Audio input (only active in the PC HDMI mode, not in the PC VGA mode):
It is possible to choose between the DIGITAL/ANALOG settings with the
Buttons or through a list of choices, which can be reached by pressing the MENU Button.
DIGITAL:
Your TV device will reproduce the digital sound present in the HDMI signal.
ANALOG:
The sound signal from the analogue Audio In socket will be reproduced.
Note: The digital HDMI signal usually consists of image and sound. However, it can
definitely occur that your PC or your source of video does not transmit the sound infor-
mation by means of an HDMI signal or DVI signals are reproduced through a so-called
DVI-HDMI adapter. In this case, you will have to make the audio signal available
through the analogue HDMI Audio In socket of your TV device and switch the audio input
to the ANALOG setting.
10. You leave the Menu with the EXIT Button.
Note: The device is provided with standardized pre-settings for the above setting values.
Nevertheless, manual adjustment of the settings values may be necessary, to achieve un-
disrupted reproduction and complete reproduction, because of deviating signals of your
video adapter or your video source!
VOL+/VOL- Buttons.
VOL+/VOL- Buttons. This setting should only be changed in
1 1 1 1 . . V V G G A A H H D D M M I I P P C C
A A N N D D
VOL+/VOL-
M M O O D D E E
29