Connection Of An External Device To The Scart Socket; Connecting A Video Recorder To The Aerial Socket; Connecting A Decoder; Connecting A Camera Recorder - Medion md 30022 Bedienungsanleitung

1 0 . C
1 0 . C
O N N E C T I N G
O N N E C T I N
C
ONNECTION OF AN EXTERNAL DEVICE TO THE
Please connect the SCART/AV1 or the SCART/AV2 socket of the TV to the device to be con-
nected with a EURO AV cable (Scart cable), to connect a video recorder, a DVD player, a
SAT receiver or similar to one of the two Scart sockets of your TV, for example.
Note: Please pay attention to the instruction for use of the device to be connected.
C
ONNECTING A VIDEO RECORDER TO THE AERIAL SOCKET
Please connect the aerial input of the TV to the aerial output of your video recorder by
means of an aerial cable, to connect a video recorder to the aerial socket of your TV. Please
connect your domestic aerial to the aerial output of your video recorder.
You can choose any channel slot on the TV to represent the picture and sound signals of
your video recorder. The selected channel slot must be coordinated with the station fre-
quency of the aerial output of your video recorder to achieve this (usually between channels
30 and 40) – see chapter „Setting channels manually" on Page 20.
You should set the '10th ADJUSTMENT' Menu Point in the PROGRAM EDIT Menu to VCR after
carrying out the tuning, to avoid picture distortion.
Note: Please pay attention to the instructions for use of your video recorder.
C PC
ONNECTING A
Your TV device is able to represent both analogue and digital multimedia input signals and
offers you the possibility of connecting a PC or a source of video with a DVI, HDMI or com-
ponents output (a DVD player for example).
To do so, connect the VGA or HDMI socket of the TV device to the video display adapter of
your PC or to your source of video. Digital sound signals are usually contained in the HDMI
signal and do not have to be additionally connected.
Connect the line output of your PC or the audio output of your source of video to the re-
spective in input (black jack socket next to the VGA or HDMI input on the back of the de-
vice), in order to reproduce analogue sound signals on the TV device. You may have to use
a corresponding adapter or adapter cable for the connections.
Note: Please pay attention to the instructions for using your PC and the sound and video
display adapter or your source of video and the technical data of your TV device, in order to
select the necessary sound settings and the settings for the resolution and the vertical
scanning frequency.
C
ONNECTING A DECODER
You need a decoder to be able to receive encrypted channels. Please connect it to the
SCART/AV2 socket of your TV by means of a EURO AV cable (Scart cable).
Please refer to the chapter "Setting channels manually" on page 20 for advanced settings in
relation to decoder operation.
Note: Please pay attention to the instructions for use of your decoder.
C
ONNECTING A CAMERA RECORDER
Connect the device to the front AV.SV socket of your TV with a commercially available cable
(cinch cable and/or S-video cable), in accordance with the coloured cable and socket identi-
fication, to connect a camera recorder.
Note: Please pay attention to the instructions for use of your camera recorder.
E D
E D
X T E R N A L E V
G X T E R N A L E V
S
OR A OURCE OF
1 1 0 0 . . C C
O O N N N N E E C C T T I I N N G G
I C E S
I C E S
S
CART SOCKET
M V
ULTIMEDIA IDEO
E E D D
X X T T E E R R N N A A L L E E V V I I C C E E S S
25