Manual Addition Of Channels; Add New Channels Automatically - Medion md 30022 Bedienungsanleitung

M
ANUAL ADDITION OF CHANNELS
1. Go to the first empty channel slot following the channel slots already stored in the pro-
gram table with the
lect the NEW TV signal source.
2. Now enter the channel type and subsequently the channel number or the relevant fre-
quency. Check the remaining settings for correctness in relation to the required sta-
tion(see chapter „Setting channels manually"from page 20).
3. Press the EXIT Button and confirm that you want to store the changes carried out with
YES.
A
DD NEW CHANNELS AUTOMATICALLY
This function is very useful if the range of channels in your reception area (e.g. on the cable
network) is increased. An automatic station search, which will store all channels newly
added since the last station search, is started.
1. Press the MENU Button to reach the Main Menu.
2. Select the INSTALLATION Point with the
ton again.
3. Select the SEARCH FOR NEW CHANNELS Menu Point with the
the MENU Button and select START. The AUTOMATIC STATION SEARCH Menu will now
appear on the screen:
4. This Menu serves to display the progress of the station search so far. You can cancel the
station search at any time with the MENU or the EXIT Button. No new stations will be
stored in this case.
You will reach the program table when the station search has finished, as following the
5.
initial installation. New channels will have been added following the channels already
available. Please refer to chapter „Program table" on Page 18, if you want to change the
sorting or the names.
22
P+/P-, VOL+/- Buttons. Press the MENU Button and se-
Installation
1. Select Location
2. Language
3. New installation
4. Search new programs
5. AV Settings
6. Switch on
7. Setting of all programs
8. Basic settings
9. Start logo
10. Service
Automatical Search
Frequency
Channel type
Last station
Found so far
Cancel
E E
N N G G L L I I S S H H
P+/P- Buttons and press the MENU But-
P+/P- Buttons, press