Guntermann & Drunck MultiPower-12-NT Installationsanleitung Seite 25

9. Use the paragraphs
10.Enter the following data in the field Global network settings:
11.Click OK to save your data.
12.Click the
13.Remove the twisted pair cable connection between the computer and the central
power unit.
14.Integrate the central power unit into the local network.
Downloaded from www.Manualslib.com
Interface A
Operational Select the operational mode of
mode:
menu:
 Off:
 Static:
 DHCP:
IP address: Only if the Static operating mode has been selected:
Enter the interface IP address.
Netmask: Only if the Static operating mode has been selected:
Enter the network netmask.
Connection Select if the network interface and its communication part-
type:
ner are to negotiate the connection type automatically (
or if one of the available types is to be applied.
Global prefer- Select the operational mode in the pull-down menu:
ences:
 Static:
 DHCP:
In the DHCP operational mode, the following settings are obtained auto-
matically. Inputs are therefore not possible.
Hostname:
Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1:
Enter the DNS server IP address.
DNS Server 2:
Optionally, enter the IP address of another DNS server.
Exit symbol (see figure on the right) to end the
web application.
manuals search engine
Initial configuration of the network settings
to enter the following data:
switches off network interface.
uses static settings.
obtains the settings from a DHCP server.
uses static settings.
obtains the settings from a DHCP server.
A in the pull-down
interface
G&D MultiPower-12-NT · 8
)
Auto