Status Displays - Guntermann & Drunck MultiPower-12-NT Installationsanleitung

Status displays

Status displays
The LEDs on the front and the back panel of the
central power supply show the device status and
the load of active devices.
Section
Ident.
Network
Load
Status
Power
5 · G&D MultiPower-12-NT
Downloaded from www.Manualslib.com
LED Status
on
yellow on
off
green flickering
off
Ready on
off
System green
blinking,
green
fast blinking,
green
red
Red. on
off
Main on
off
manuals search engine
Ident. Network
Meaning
On as soon as the LED has been activated via
web application.
The connection to the network has been suc-
cessfully established.
A connection could not be established.
Network activity.
No network activity
The load of the active devices is displayed in an LED
scale.
Four green and two yellow LEDs highlight the reach-
ing of the maximum load.
If the maximum load is exceeded, one or two red
LEDs light up.
Note: If one or two red LEDs indicate that the temper-
ature within the device is too high, make sure to cool
the device.
Device is ready for operation.
Device is not ready for operation.
Device is ready for operation.
Executing update.
Device is reset to default settings after pushing the
Reset button for a long time.
Internal error
The power pack is turned on and supplies the
required voltage.
The power pack is turned off, or there is no connec-
tion to the mains.
The power pack is turned on and supplies the
required voltage.
The power pack is turned off, or there is no connec-
tion to the mains.
Load Status Power
Ready Red.
System Main