Cleaning; Troubleshooting - Silvercrest SKT 2000 B1 Bedienungsanleitung

Downloaded from www.Manualslib.com
RP91021 Konvektor mit Timer LB4 Seite 9 Donnerstag, 1. August 2013 9:42 09
To ensure your appliance gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of
an electric shock or burning:
– remove the mains plug before
each clean;
– allow the appliance to cool
down;
– never immerse the appliance in
water;
– never allow water or cleaning
agent to run into the appliance.
Fault
Appliance cannot be Faulty fuse or wall socket
switched on
Faulty appliance
Appliance switches Thermal cut-out has
off automatically triggered
Selected temperature has
been reached
SKT 2000 B1
manuals search engine

7. Cleaning

1. Carefully remove major dust deposits
with a vacuum cleaner.
2. Clean the outside of the appliance with
a damp cloth. You could also use a little
washing-up liquid.
Caution! Never use caustic or abrasive
cleaning agents, as this could damage
your appliance.
3. Wipe the appliance with a cloth
moistened with clear water.
4. Do not use the appliance again until it
has dried completely.
8.

Troubleshooting

Cause
Select another wall socket
Have repairs carried out at a specialist
workshop or dispose of the appliance.
You will find the service address in
"Service Centre" on page 11.
Allow the appliance to cool down (see
"6.6 Thermal cut-out" on page 8)
Clean the appliance (see
"7. Cleaning" on page 9)
Heating switches on again automati-
cally as soon as the room temperature
falls
Select a higher required temperature
Remedy
9