defunc TRUE GO Bedienungsanleitung Seite 5

GET STARTED
1. Make sure the earbuds are fully charged.
2. Open the charging case, take out the earbuds. The earbuds will
automatically power on and pair with each other.
3. When blue/red lights on the right earbud flash alternately, and a blue
light on the left earbud flashes slowly, the earbuds are ready to pair
with your device.
4. Turn on the Bluetooth function on your device and select
Defunc TRUE GO in the list to pair earbuds with the device.
TOUCH AREA FUNCTIONS
Tap or press the earbud touch area to control
different functions.
Play/pause track: Tap any earbud once
Next track: Double tap the right earbud
Previous track: Double tap the left earbud
Answer/end call: Tap any earbud once
Reject call: Press any earbud for 3 seconds
Activate/deactivate voice assistant: Triple tap any earbud
POWER ON
There are two ways to turn the earbuds on:
1. Remove the earbuds from the charging case for auto-power on.
2. Press the touch area for 3 seconds.
POWER OFF
There are three ways to turn the earbuds off:
1. Put the earbuds back in the charging case and close the cap.
2. Press the touch area for 3 seconds.
3. The earbuds turn off after 5 minutes if not active.
5