Direction For Use - Carmen DC1055 Gebrauchsanweisung

6 • ENGLISH
> DIRECTION FOR USE
IMPORTANT: THIS IS A HIGH TEMPERATURE PRODUCT
Dry the hair completely before using the hot air brush. The
combi pin brush can be changed easily by pressing on
the push button. Any other attachment can be placed on
the device. Plug the device in the socket when the desired
attachment is placed. Take hold of a strand and pull it
straight out from the head. Place the hot air brush against
the hair strand, close to the head and on the side where you
want that strand to fall, and pull the brush through the hair.
This method will spread the hair evenly across the brush.
Pull the brush to the end of the strand and catch the hair
ends in the brush. Now roll up the brush until you reach
the head (or stop earlier if you only want to curl the ends).
Switch on the device and wait till the curl keeps it shape.
Unroll the curl until you can remove the round brush from the
curl. Allow the curl to cool down before brushing it through.
Proceed in the same way, strand by strand. After a little
practice with the hot air brush you will soon learn how to
achieve the results you are looking for
Switch:
0 = device is off
1 = 500 W
2 = 1000 W
> CLEANING AND MAINTRANCE
• Unplug the device before cleaning it.
• Do not let children clean the device.
• Never submerse it in water.
• Protect the device from dust.
• Occasionally clean the ventilation grille to remove dust
and hairs.
• You can use a slightly damp cloth to clean the device.
Afterwards, dry the device with a dry cloth.