Specific Safety Instructions; Direction For Use; Hints And Tips - Carmen CR5270 SENSOR STRAIGHT Gebrauchsanweisung

6 • ENGLISH
> SPECIFIC SAFETY INSTRUCTIONS
• Never cover or recover the plates.
• The plates and other hot elements of the device can
cause burns.
• Using a hairspray can cause burns when the spray
comes in contact with the plates.
• Never hold the device by or near the plates when the
device is switched on. The plates can cause burns. Avoid
all contact with your skin and eyes.
> DIRECTION FOR USE
IMPORTANT: THIS IS A HIGH TEMPERATURE
PRODUCT
1. Plug the unit and turn it on. Wait to allow the unit to
reach its proper working temperature. Depending on
what your hair needs, select the appropriate temperature
using the "+" and "-" temperature control buttons. Note
that the lower temperature is for the easy styled hair.
The middle temperature is for normal hair and the high
temperature is for hard styled hair.
2. To use the automatic sensor protect function; switch
on the button (D) for one second to set the right
temperature, which measures the moisture in your hair.
The sensor protect function is recommended to protect
your hair from overheating.
3. Hair should be clean and dry when using the styler. While
styling, section the hair into strands of 5 to 6 cm wide
in one row. Keep the hair strand smooth by brushing or
combing through the section (from scalp to hair ends)
while holding the ends taut with the other hand.
4. Close the appliance and draw the hair straightener
slowly from the roots through to the tips of your hair.
Repeat until your hair is as straight as you want.
5. When you have finished styling and all the hair have
cooled thoroughly, gently brush and style your hair into
the style desired.
> HINTS AND TIPS
• Hair should be completely dry to achieve best result.