Maico AE 10/1 Montage- Und Betriebsanleitung Seite 47

AE 10/1, AE 15/1
● NOTICE: Risk of damage to unit in the
event of short-circuits. Insulate PE
conductor and individual cable cores that
are not required. Do not touch electric
components.
1. Switch off mains fuse, secure against
being accidentally switched back on and
position a visible warning sign.
2. Remove electronics cover [3] if neces-
sary.
3. Only lay single cable cores in the unit.
Remove the power cable's sheathing in
the terminal compartment. Strip single
cable cores up to 9-10 mm.
4. Insert housing in wall breakthrough/
wall sleeve and attach it with two screws
(AE 10/1) / with three screws (AE 15/1).
Do not insert the housing such that it is
twisted or crushed. Make sure you use
mounting material which is sized for the
purpose.
DE
UK
VENTILATOREN
FR