Maico AE 10/1 Montage- Und Betriebsanleitung Seite 44

AE 10/1, AE 15/1
4. Align housing horizontally, mark three
dowel holes (arrows).
5. Remove housing, drill holes and insert
dowels.
6. Affix the supplied sealing strip all the way
around the housing connections so that
AE 15/1 does not draw in air erroneously.
7. Push cable grommet carefully out of
housing and remove it. Alternatively,
with an electrical surface-mounted con-
nection, leave cable grommet [10] in the
housing and take cable grommet [11] out
DE
UK
VENTILATOREN
FR