Maico AE 10/1 Montage- Und Betriebsanleitung Seite 45

AE 10/1, AE 15/1
of the housing.
● NOTICE: Danger of short-circuits and
damage to the unit. Water will penetrate
if the power cable is incorrectly fed into
the unit housing or if the cable grommet
is not fitted correctly.
Cut off cable grommet cap such that the

cable grommet fits tightly round the power
cable. Cut a minimum of 5 mm off the cap
(power cable can bend better and electronics
cover can be positioned correctly).
Fit cable grommet correctly, seal on site

if required.
8. Insert the cable grommet in the housing.
9. Feed power cable into the connection
area such that the cable grommet fits
DE
UK
VENTILATOREN
FR