Charging The Battery - Fakir Robert II RS 710 Benutzerhandbuch

EN
Place the docking station on the flat ground against to the wall. Make sure no obstacles
ahead 3 meters and within 1 meters scope.

Charging the battery

ATTENTION!
Before you use the robot for the first time, please check whether the battery is fully
charged.
Danger!
Electric shock.
Charging with the docking station:
Connect the adapter to the charging station first, then insert to the power supply and place
the vacuum cleaner on the station for charging. The green indica-
tor will flash when looking for charging station, the green indicator on charging station will
be off when charge back successfully. The green indicator will breath during charging and
keep green on after fully charged.
Charging via the remote control:
When the cleaner is not in error mode, press the
recharge mode.
button to let the machine enter the
38