11
12
13
14
15
Downloaded from
www.Manualslib.com
Deutsch
Vorbereitungen
11
Frontabdeckung des Geräts öffnen und
kontrollieren, dass Staubbeutel s-bag® und
Kombinationsfi lter (Motorfi lter + Mikrofi lter)*
/ Motorfi lter* eingesetzt sind (siehe auch
"Filterwechsel").
12* Hintere Abdeckung* des Geräts öffnen und
kontrollieren, dass Abluftfi lter* eingesetzt ist.
13
Schlauch einführen, bis Verriegelung einrastet.
Zur Freigabe des Schlauches Verriegelung
16
drücken.
14
Verlängerungsrohre* oder Teleskoprohr* durch
Drehen und Zusammenschieben an Schlauchgriff
und Bodendüse anbringen. (Zum Zerlegen drehen
und auseinanderziehen.)
15
Elektrokabel herausziehen und an Steckdose
anschließen. Der Staubsauger verfügt über
eine automatische Kabelaufwicklung. Nach
dem Herausziehen des Kabels arretiert die
Kabelaufwicklung.
16
Zum Zurückspulen des Kabels Fußpedal drücken.
17a
Das Kabel wird dann aufgewickelt.
17a Zum Einschalten des Staubsaugers
Leistungsregler in Richtung "Ein"
schieben. Saugleistung durch Schieben
des Leistungsreglers in Richtung "Max"
erhöhen. Zum Ausschalten des Staubsaugers
Leistungsregler in die entgegengesetzte Richtung
in die Stellung "Aus" schieben.
17b* Die Saugleistung kann auch mithilfe der
Saugsteuerung am Schlauchgriff eingestellt
werden.
18a Praktischer Power Clip, der den Staubsauger
17b
automatisch ausschaltet, wenn die Düse bzw. der
Schlauch hier platziert wird. Ideale Parkposition
für Arbeitspausen und (18b) Aufbewahrung.
18a
18b
* Nur bestimmte Modelle.
manuals search engine
English
Before starting
11
12* Open the back lid* on the machine and check
13
14
15
16
17a Start the vacuum cleaner by sliding the power
17b* Suction power can also be adjusted by using the
18a Practical on/off Power Clip, the Power Clip
* Certain models only.
6
Open the front cover on the machine and check
that the dust bag s-bag®, and the combination
fi lter (motor+micro fi lter)*/ motor fi lter* are in
place. (See also Replacement of fi lter)
that the exhaust fi lter* is in place.
Insert the hose until the catches click to engage
(press the catches to release the hose).
Attach the extension tubes* or telescopic tube*
to the hose handle and nozzle by pushing and
twisting together. (Twist and pull apart to
dismantle.)
Extend the electric cable and connect it to
the mains. The vacuum cleaner is fi tted with a
cable winder. Once the electric cable has been
extended, it stays in that position.
To rewind the cable, press the cord rewinder
pedal. The cable will then rewind.
control in the "On" direction. Increase suction
power by sliding the control further up to "Max"
position. Stop the vacuum cleaner by sliding in
the opposite direction to "Off" position.
suction control on the hose handle.
automatically turns the vacuum cleaner off when
nozzle/tube is placed here. Ideal parking position
for pausing and (18b) storing,