Overview Of The Components - AEG MRC 4111 Bedienungsanleitung, Garantie

50
• Keep the device away from vases, baths, wash basins etc. If liquid enters

Overview of the Components

Putting into function
Insert the plug into a properly installed 230 V, 50 Hz power socket.
Radio station tuning
1. Turn the band selector switch (11) to the FM or AM position, depending on
2. Move the function switch (17) to the ON position.
3. Turn the tuning control in order to tune in to a station. The station scale
4. If reception is too weak, change the position of the dipole antenna in order
5. An aerial is integrated into the device for the reception of AM stations. The
83649-05-MRC4111_AEG.indd 50 83649-05-MRC4111_AEG.indd 50
Downloaded from www.Manualslib.com
English
the device this may cause serious damage.
1 Set minutes (MIN)
2 Hour function key (HR)
3 Function key for delayed switch-off (SLEEP)
4 Function key (SNOOZE)
5 Loudspeaker
6 Throw-out aerial (FM)
7 Mains lead
8 Alarm (AL) function button
9 Time setting function key (TIME)
10 Volume control (BUZZ. OFF
11 Band selection switch (AM/FM)
12 Regulator (TUNING)
13 Frequency display, Station scale
14 Battery compartment
15 LED display
16 LED for activated alarm function (AUTO)
17 Function switch (ON/OFF/AUTO)
which frequency band you wish to hear.
UKW = FM, Medium Wave = AM.
shows the frequency that has been set.
to improve the reception.
device can be aligned to the station by changing its position.
manuals search engine
VOL)
24.02.2009 12:23:48 Uhr 24.02.2009 12:23:48 Uhr