Interior fittings
Freezer compartment shelf
~ Fig. #
You can vary the shelf:
Lift shelf and remove.
1.
Detach mounting bar and reposition.
2.
Insert shelf.
3.
Shelf
~ Fig. $
You can vary the shelf:
Pull out and remove the shelf.
■
Container
~ Fig. %
You can remove the container:
Pull out the container all the way, lift
■
at the front and remove.
Storage compartment
~ Fig. &
You can remove the storage
compartment:
Lift up storage compartment and
■
remove.
1
Operating the
appliance
Switching on the appliance
p l i a n c e
O p e r a t i n g t h e a p
Press the % button.
1.
The appliance begins to cool.
Set the required temperature.
2.
~ "Setting the temperature"
on page 25
Operating the appliance en
Operating tips
After the appliance has been
■
switched on, it may take several
hours until the set temperature has
been reached. Do not put in any
food until the selected temperature
has been reached.
The sides of the housing are partly
■
heated slightly. This prevents
condensation in the area of the door
seal.
Switching off and
disconnecting the appliance
Switching off the appliance
Press the % button.
■
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for a
prolonged period:
Press the % button.
1.
The appliance no longer cools.
Pull out the mains plug or switch off
2.
the fuse.
Clean the appliance.
3.
Leave the appliance open.
4.
Setting the temperature
Recommended temperature
Refrigerator compartment:
Refrigerator compartment
Keep pressing the button °C until
■
the display indicates the required
temperature.
+4 °C
25