Philips SENSEO Latte Duo Plus HD7858 Benutzerhandbuch Seite 8

Place one cup or two cups under the spout
8
openings. Use the markings on the drip tray to
place the cup or cups (Fig. 16).
Note:
D
You can adjust the height of the drip tray
or remove the drip tray to be able to place
higher cups.
Note
D
The cups you use should have a capacity of at
least 150ml when you brew regular coffee or
100ml when you brew strong coffee. Do not
use cups that are too large, as they cause the
coffee to get cold more quickly.
Press the button with two coffee beans for
9
a regular cup of coffee. Press the button
with three coffee beans for a strong cup of
coffee (Fig. 17).
Press the recipe button once for one cup of
10
coffee or twice for two cups of coffee.
When the water has heated up and the on/
11
off button lights up continuously, the machine
automatically starts brewing coffee.
Note:
D
Do not remove the water reservoir during a
brewing cycle.
When the coffee is ready, remove the used
12
coffee pod or pods. Simply lift the pod holder
out of the machine and empty it.
Caution:
C
There may still be some hot water/coffee on
the coffee pod or pods.
After use, press the on/off button to switch
13
off the machine. (Fig. 18)
Note:
D
If you do not use the machine, it switches off
automatically after 15 minutes to save energy.
8
6 Brewing a coffee
speciality with fresh
milk
With the SENSEO
®
create the perfect cappuccino, café latte, latte
macchiato or warm milk only with two cups at the
same time.
Make sure that the water reservoir is filled
1
with fresh cold tap water (Fig. 3).
Tip:
E
Use fresh water every day.
Put the plug in an earthed wall socket.
2
Press the on/off button. The on/off button
3
flashes slowly while the water heats up. (Fig. 8)
Note:
D
If the on/off button flashes rapidly, the water
reservoir does not contain enough water for
brewing one cup of coffee.
Pull the lid lever upwards to open the
4
lid. (Fig. 12)
If you want to make one cup of cappuccino,
5
café latte or latte macchiato, place the 1-cup
pod holder q in the machine (1). If you want
to make two cups, put the 2-cup pod holder
qq in the machine (2). Make sure the pod
holder is clean. (Fig. 13)
Note:
D
For warm milk only, you do not have to place a
pod holder in the machine. Proceed with step 7.
Place 1 coffee pod in the 1-cup pod holder
6
q (1) or place 2 coffee pods in the 2-cup
pod holder qq (2). Place the pod or pods
properly in the centre of the pod holder,
with the convex side pointing downwards.
Press the pod or pods lightly into the pod
holder. (Fig. 14)
Note:
D
Make sure the coffee in the pod or pods is
evenly distributed.
coffee machine you can easily