'Battery Low' Indication; Preparing For Use; Application Tips - Philips VisaCare SC6240 Bedienungsanleitung

'Battery low' indication

Preparing for use

- The charging light flashes white to indicate that the appliance is charging.
- When the battery is fully charged, the charging light lights up white
continuously. After approx. 30 minutes, the charging light goes out to
save energy.
When the battery is almost empty, the charging light flashes amber for 4
seconds during use and after you have switched off the appliance. The
battery still contains enough energy for a complete 5-minute session. When
the battery is completely empty, the device switches off automatically and
the charging light flashes amber very quickly.
Make sure you have charged the appliance for 8 hours before you use it for
the first time.
Preparation
Always clean your face and gently dry it before you use the appliance.
Note: The appliance is intended for dry use only. Do not use it on a wet face
or in the shower or bathtub.

Application tips

VisaCare comes with two different tips:
- 'Normal' tip for regular use.
- 'Sensitive' tip for mild use.
We advise you to use the 'Sensitive' tip during the first sessions to see how
your skin reacts. If the skin reacts well to the 'Sensitive' tip, you can try the
'Normal' tip. Normal and adverse skin reactions are described elsewhere in
this user manual (see 'Troubleshooting').
Note: Use the QR-code on the front cover or follow the link to watch the
online video for instructions on correct use of the appliance.
English
11