Fender FUSE Bedienungsanleitung Seite 8

Band track screens
Click on the "BAND TRACK" button {A} to select a Band track and adjust Band settings for the currently selected preset on the G-DEC 3.
B. MP3 / WAVE — Select the MP3/Wave radio button if you want
to select an MP3/Wave Band track file for the currently active
preset on the G-DEC 3.
C. TRACK LIST — Click on this drop down list to select an MP3/
Wave Band track on the G-DEC 3 hard drive (HD) or SD card on
the G-DEC 3.
D. COPY TO AMP SD/HD — Click on either of these buttons if you
want to select an MP3/Wave file on your computer to copy to
your G-DEC 3 hard drive (HD) or SD card in the G-DEC 3. These
options will not be available if the amp or SD card are not
connected.
E. AUDIO MIX — Choose an audio mix for the Band track selected
in the Track List {C}. Select STEREO for normal operation. Select
LEFT/RIGHT MIX if you want to adjust the balance of the Band
track to focus on the audio content of one channel. Select
CENTER CANCEL if you want to eliminate the audio in the
"center" of the mix in a stereo file. This is often effective in
removing the lead guitar and vocals from a song.
F. BALANCE — Adjusts the left/right (1/10) balance for the Band
track selected in the Track List {C} when LEFT/RIGHT MIX is
chosen for the Audio Mix {E}.
G. SPEED — Adjusts the playback speed of the Band track selected
in the Track List {C}.
H. PITCH — Adjusts the pitch of the Band track selected in the
Track List {C}.
I. PREVIEW / STOP — Click Preview to listen to the Band track
selected in the Track List {C}.
J. OK / APPLY — Click OK or Apply to save all your selections and
settings for the currently active preset on the G-DEC 3.
8
K. MIDI — Select this radio button if you want to select a MIDI
Band track file for the currently active preset on the G-DEC 3.
L. TRACK LIST — Click on this drop down list to select a MIDI
Band track on the G-DEC 3 hard drive (HD) or SD card on the
G-DEC 3.
M. COPY TO AMP SD/HD — Click on either of these buttons if
you want to select a MIDI file on your computer to copy to your
G-DEC 3 hard drive (HD) or SD card in the G-DEC 3. These options
will not be available if the amp or SD card are not connected.
N. TEMPO — Adjusts the tempo of the MIDI Band track selected in
the Track List {L}.
O. TRANSPOSE — Use to transpose the key of the MIDI Band track
selected in the Track List {L}.
P. DRUM SOLO — Select this check box if you want the MIDI Band
track selected in the Track List {L} to play only the drums channel
(ch 10) of the MIDI file.
Q. COUNT IN — Select how many beats you want the MIDI file
selected in the Track List {L} to count in before the actual song
starts. Four is a typical number for most songs written in 4/4
time signature.
R. PREVIEW / STOP — Click Preview to listen to the Band track
selected in the Track List {L}.
S. OK/APPLY — Click OK or Apply to save all your selections and
settings for the currently active preset on the G-DEC 3.
f e n d e r . c o m