Fender FUSE Bedienungsanleitung Seite 5

Rack effects
Click on any of the three slots {A} to the right of the amplifier icon to open the rack effects edit screen for the currently active
preset on the G-DEC 3. These effects are located after the amp model in the signal path to provide a sound similar to effects that
are connected through the effects loop of an amplifier, or added at the recording console.
B. RACK EFFECT — Click on the drop down menu to select an
effect, or use the up/down arrows to scroll through effects in the
currently selected effect category {A}. Effects are separated into
three categories: Modulation, Delay and Reverb.
C. EFFECT SETTINGS — Click and drag any of these knobs to
adjust the rack effect settings.
D. BYPASS / DELETE — Click on the power switch to turn the
effect on-off (bypass). The red light to the left of the power
switch indicates when the effect is on or off. Click on the "X" to
delete the effect.
f e n d e r . c o m
5