Fender FUSE Bedienungsanleitung Seite 2

Introduction
Fender® FUSE™ makes it fun to tweak your amp's performance
parameters, increase your music creation and storage capabilities,
and custom configure your amp for your favorite tones and music.
Is your amp going to be 100% metal? 100% blues? With G-DEC 3
and Fender FUSE, it's 100% up to you.
Fender FUSE is also your key to the Fender Community where you
can share your ideas with other users and start swapping! Maybe
YOU will be the power user everyone's talking about.
Fender ® FUSE™ — installation
1. Insert the G-DEC DVD into your computer DVD
drive and locate the Fender FUSE setup icon.
Double click the setup icon and follow the
prompts to install the Fender FUSE software on
your computer. NOTE: Macintosh users must
have an internet connection to start the Fender
FUSE installation. Do not attempt to install
Fender FUSE on a virtual Windows machine on
your Macintosh computer.
2. Once you have the software installed, launch
Fender FUSE. To make sure you have the most
current software version of Fender FUSE, check
the "About" menu under "Help" and write down
your Fender FUSE version number. Then log
on to http://www.fender.com/gdec3/support
and check if a newer version is available. If so,
download the newer version to your computer.
Open the downloaded file to update your Fender
FUSE software.
3. With the Fender FUSE software running on your
computer, connect your G-DEC 3 to a USB port
on your computer as shown (right) and the
Fender FUSE software will recognize your amp.
Do not connect through a USB hub.
4. You are ready to begin using Fender FUSE! Refer
to this manual to learn how to navigate through
the Fender FUSE interface and make the most of
this powerful tool.
2
Fender® FUSE™ features:
• R otate virtual amp knobs on your larger monitor screen;
your amp will mirror your actions in real time
• E dit, tweak, manage and store a virtually unlimited number
of presets; you are not limited to the 100 slots on the amp
• A ccess to effects combinations beyond what the amp has on
its own
• E dit, tweak, manage and store a virtually unlimited number
of backing loops
• T ransfer backing tracks to the G-DEC amp's internal hard
drive or an SD card
• U pdate G-DEC 3 system firmware
G-DEC 3 DVD
f e n d e r . c o m
FENDER.COM
OWNER'S MANUAL
TUTORIAL VIDEOS
USB