Fender FUSE Bedienungsanleitung Seite 4

Pedal effects
Click on any of the four slots {A} to the left of the amplifier icon to open the effects pedal edit screen for the currently active preset
on the G-DEC 3. These effects are located before the amp model in the signal path.
Fender FUSE gives you access to effects combinations beyond what the amp has on its own. For example, you can put an echo
pedal before the amp, which could be just the thing for a rockabilly tone. Modulation effects like flangers and phasers sound very
different in front of the amp.
EXCLUSIVE
•EFFECTS POSITION Pre– or Post–Amp
•EFFECTS BYPASS
These Fender FUSE features add functionality beyond what the G-DEC 3 provides
on its own. Fender FUSE allows you to position your Modulation, Delay and
Reverb effects before the amplifier in the signal path for a wider variety of sonic
options. Fender FUSE also allows you to bypass an effect temporarily rather than
deleting it and losing all your effect settings each time you want to turn it off.
4
FEATURES:
f e n d e r . c o m
B. EFFECT PEDAL SELECTOR— Click on the drop down menu to
select an effect, or use the up/down arrows to scroll through
effects in the currently selected effect category {A}. Effects are
separated into four categories: Stompbox, Modulation, Delay
and Reverb.
C. EFFECT SETTINGS — Click and drag any of these knobs to
adjust the effect pedal settings.
D. PEDAL COLOR — Click on any of these color swatches to
change the color of the effect pedal. Color changes are for your
preference and do not change the sound of the effects.
E. BYPASS / DELETE — Click on the footpedal switch to turn the
effect on-off (bypass). The red light in the upper left corner
indicates when the effect is on or off. Click on the "X" to delete
the effect.