Replacing The Blade; Ordering Accessories - Philips OneBlade QP2531 Bedienungsanleitung

18
English

Replacing the blade

2
1

Ordering accessories

Similar to a manual blade, the blade becomes
blunt over time, which results in increased hair
pulling and reduced cutting performance.
1 Switch off the appliance.
2 Push the blade release slide upwards carefully,
and hold the blade on both sides to remove the
blade. This will prevent the blade from flying off
the handle.
3 Hold the new blade on its sides and press it
onto the handle ('click').
Note: When you hear a click, the new blade is
placed correctly and ready for use.
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go to
your Philips dealer. You can also contact the
Philips Consumer Care Center in your country (see
the international warranty leaflet for contact
details).
The following parts are available:
- QP210 Blade 1-pack
- QP220 Blade 2-pack