Overview; Power Cord; Operation - Bosch MFQ35 Serie Gebrauchsanleitung

Overview

Please fold out the illustrated pages.
X Fig. A
Base unit
1 Ejector button
For removing the tools
2 5-level switch + instantaneous
switching
For switching the appliance on and off
and adjusting the operating speed.
P = switched off
1 = lowest speed
5 = highest speed
M = instantaneous switching
(highest speed), press left and
hold down

3 Power cord

4 Rear aperture with lock
For inserting accessories,
e.g.the high-speed hand blender
5 Release buttons
For removing accessories from
the rear aperture. Press both buttons
simultaneously.
6 Apertures for inserting the tools
Tools
7 Stirring whisks
8 Kneading hooks
For some models:
9 High-speed hand blender
10 Blender jug
11 Universal cutter
(separate instruction manual)
If the universal cutter or high-speed hand
blender is not included in the product
package, these can be ordered from
customer service.

Operation

Base unit with tools
An especially good result is achieved
if the tools are used for the following
applications.
Stirring whisks for:
Sauces, egg whites, mashed potatoes,
crème fraîche, mayonnaise, cream and light
dough, e.g. cake mixture.
Stirring whisks are not suitable for
pro cessing heavy dough.
Kneading hooks for:
Stiff mixtures such as short pastry, yeast
dough and potato dough as well as for
mixing heavy mincemeat dough, pasta or
bread dough.
The maximum processing quantity is
500 g of flour and ingredients.
Important note: When the rear aperture is
open, the appliance can be operated using
instantaneous switching only. Selector
switch 1-5 will not function. Open and close
the lock on the rear aperture only when
the switch is in position P.
W Risk of injury from sharp blades/
rotating drive!
Never grip the blade in the blender foot.
Never clean blades with bare hands. Use a
brush. Never grip the rotating tools. Do not
attach or remove tools until the appliance is
at a standstill – when switched off, the appli-
ance continues running briefly. Protect long
hair or loose items of clothing to prevent
them from becoming caught in the rotating
tools.
■ Before using the appliance for the first
time, clean the base unit and tools.
X Fig. B
■ Completely unwind the power cord.
■ Place the required tool on the base unit
and depress until it locks into position.
Note the shape of the plastic parts on
the tools to prevent mixing them up
(see Fig. B-1)!
■ Plug into the mains.
■ Place the food in a suitable receptacle.
Overview en
11