Conel CLEAR FILL Montageanleitung Seite 8

5.
6.
h
/ Plug the hose connectors of the braided hoses in-
to the connection head of the desalination or sof-
tening bottle. Pay attention to the direction of
flow marked
• with arrows on the connection head
• with IN/OUT on the hose connectors!
The hose connectors are coded, thus preventing
incorrect connection.
/ Plug the securing clips (h) as follows onto the two
hose connectors at the connection head of the
desalination or softening bottle:
• Plug the inner pins of the securing clips into
the holes provided at the connection head
• Then slide the securing clips over the roun-
ded part of the connection until they snap in-
to position.