Philips AVENT SCF358 Benutzerhandbuch Seite 7

Explanation of settings
Milk volume
Baby food warming
Keep warm / defrost
When the entire progress indicator is on but not flashing, the milk / food is ready
for feeding. Feed your baby when the milk / food is warmed. Do not rewarm the
milk / food after it has cooled down, as bacteria may start to develop in it.
Warm milk
1
Place the bottle in the bottle warmer. Fill with drinking water to the level of
the milk. If you have a large volume of milk, fill with water to approximately
1 cm below the top of the bottle warmer.
2
Select the desired setting based on the milk volume and press the on / off
button to switch on.
• Select the milk volume you warm. You
can set from 30 ml / 1 oz up to 330 ml /
11 oz. The bottle warmer warms the milk to
approximately body temperature. It then goes
to keep warm mode automatically for about
60 minutes.
• Select this setting to warm baby food.
• The built-in sensor detects the milk / baby
food temperature to switch to the optimal
setting. If the milk / baby food is warm, it will
be warmed gradually and kept at the right
temperature. If the milk / baby food is frozen,
it will be defrosted to liquid state and then
warmed to the right temperature.
7oz
210ml
7
210
ENGLISH
7