Philips AVENT SCF358 Benutzerhandbuch Seite 17

Problem The milk is still cold.
• You may have selected an incorrect setting, are using a silicone
Cause
bottle, or have filled the bottle warmer with warm water.
• Select the milk volume setting based on the milk volume, not the
Solution
bottle size.
• If you are using a silicone bottle, select the milk volume setting
based on the milk volume. When the entire progress indicator is
on, wait for 3-4 minutes for the milk to warm.
• Fill the bottle warmer with fresh room temperature water. Do not
use warm water.
Problem After switching on the bottle warmer, the entire progress indicator is
on but not flashing.
• The bottle warmer is still too hot to warm another bottle. You may
Cause
have just finished warming a bottle. Switch off and let it cool down
for a few minutes.
• To speed up, refill the bottle warmer with fresh cold water. When
Solution
you switch on the bottle warmer, the progress indicator fills up
gradually to indicate that the appliance is warming again.
Problem The entire progress indicator flashes when warming baby food.
• Due to variations in baby food consistency, it is not possible for
Cause
the appliance to detect precisely how long the baby food should
be warmed.
• Stir the baby food while the jar or container is in the bottle warmer.
Solution
For optimal result, check its temperature while it is warming .
• When the entire progress indicator lights up continuously, the
baby food is ready for feeding.
ENGLISH
17