Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING: You cannot use PC and YPbPr at the same time.
5.
S/PDIF Coaxial Out
outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.
6.
DC 12 V Input
is used for connecting the supplied power adaptor.
Viewing the Connections - Side Connectors
1.
CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see "Conditional
Access" section.
2.
Side USB input.
3.
TV control buttons.
4.
Side audio-video connection
audio signals of external devices. To make a video connection, you must
use the supplied AV connection cable for enabling connection. First,
plug singular jack of the cable to the TV's Side AV socket. Afterwards,
insert your video cable's (not supplied) connector into the YELLOW input
(located on the plural side) of the supplied AV connection cable. Colours of
the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of
the side AV connection cable. Afterwards, insert your device's audio
cable's connectors into the RED and WHITE jack of the supplied side AV
connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED &
WHITE) to enable sound connection when connecting a device to your TV
by using PC or COMPONENT VIDEO input.
5.
Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
Power Connection
IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
12 V voltage. Connect this adaptor to a system that supplies 110-240V AC,50/60Hz.
•
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains .
input is used for connecting video and
English - 49 -
.
Werbung
Kapitel
Inhaltsverzeichnis
