Herunterladen Inhalt Inhalt Diese Seite drucken

Aerial Connection; Using Digital Multimedia Connectors; Usb Memory Connection; Connecting The Lcd Tv To A Pc - Schaub Lorenz 22LT411 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Aerial Connection

Connect the aerial ,cable TV plug to the AERIAL
INPUT socket located at the rear of the TV.
Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video  les stored in a
USB stick.
It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
You may back up your  les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any  le damage or data loss.
Do not pull out USB module while playing a  le.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
SIDE VIEW
USB MEMORY

USB Memory Connection

IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
Note: It is possible certain types of hard disk drives
are not supported.
Connecting the LCD TV to a
PC
For displaying your computer's screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See "Input selection"
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts
.

Using Side AV Connectors

You can connect a range of optional equipment to your
LCD TV using side connectors of the TV.
For connecting a camcorder or camera , you should
use AV socket (side). To do this, you must use the
supplied video/audio connection cable. First, plug
single jack of the cable to the TV's AV IN socket
(side). Afterwards, insert your camera cable's (not
supplied) connectors into the plural part of the video/
audio connection cable. Colours of the connected
jacks should match. See illustration below.
Afterwards, you should switch to
the section Input selection in the following sections
for more information.
To listen the TV sound from headphones, you
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
English - 50 -
Side AV source. See

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis