Placement Options; Wall Mounting - Asus GigaX1105N Schnellstartanleitung

Placement options

Desktop placement
Place the GigaX1105N/ GigaX1108N switch on a flat and stable surface. Make
sure that the location meets the operating environment specification. See page
3 for details.
NOTE: The length of the UTP Category 5 cable length cannot exceed 100
meters (328 feet).

Wall mounting

You can mount the GigaX1105N/ GigaX1108N switch on a wall with the
supplied mounting screws.
To mount the switch on a wall:
1. Measure the distance between the two hooks on the bottom of the switch.
2. Mark the screw position on the wall with the same distance in between.
3. Secure the supplied screws on the wall until only 1/4 is showing.
4. Latch the hooks of the GigaX1105N/ GigaX1108N onto the screws.
1
Secure two screws on the wall
Bottom Side
2 Latch the switch
onto the screws.
Figure 5. Wall-mount installation
Quick Start Guide 5