IME Conto D4-Pd Installationsanweisungen Seite 15

Conto D4-Pd
4 Run hour meter
th1 th2 th3
4.1
3-phase active power threshold, to start count
3 independent programming for each single energy meter
Selectable values: 0,4...50%Pn
Pn = rated active power
(referred to 230V x 10A = 2300W)
moves the cursor
Page
increases/decreases the loaded value
Prog
confirms
Page + Prog
t
4.2 rES
Run hour meter count reset mode
Selectable values: YES
(count resettable through keyboard)
moves the cursor
Page
increases/decreases the loaded value
Prog
confirms
Page + Prog
ATTENTION: by selecting no
(count not resettable through keyboard)
reset run hour meter count through keyboard; besides, in the ensuing access to
programming, it will be available just the power threshold selection
while is inhibited the possibility to select the reset mode
5 CodE 1000
Confirm password
Confirm or modify programming access
moves the cursor
Page
increases/decreases the loaded value
Prog
confirms
Page + Prog
If you don't want to modify the default
to confirm the existing Password.
ATTENTION!
It is essential that you record and store in a safe way the modified Password in order
to access to the programming menu at a future time.
6
- no
(count not resettable through keyboard)
it is not possible to
,
(point 8.1)
.
(point 8.2)
Password
Password (1000), press Page
Resettable Parameters
Acting on the keyboard, it is possible to reset some parameters during the display
Active Power Max. Demand
Hour Meter
Run hour meter reset
(working hours and minutes)
programming.
Active Energy
Reactive Energy
Active Power Max. Demand
Active Power Demand
Hour Meter
Voltages - Currents - Powers menu
Prog
it is available just if selected in course of
Reset
Reset
Current
Phase Voltage
Active Power
Reactive Power
Power Factor
Frequency
03/16 10783362 WEB E cod.CE4DT36