Inhaltsverzeichnis
Werbung
Signal position
44
Fig 35
HPS50 PersonalScope
X/Y - pos
Press first the ‚X/Y-pos' key before pressing the
arrow keys in order to move the signal in the direc-
tion of the arrows. Prolonged pressing will make
the X or Y- position change faster. A black bar (1)
indicates the relative position of the signal in the
sample window, see fig. 35
1
Notes:
• The Y-position cannot be shifted in 'hold'-
mode
• A total of 256 samples are stored in memory,
but the X-size of the screen is limited. By shif-
ting the X-direction you can display all stored
samples.
• At dynamic display mode (set-up menu), the
widest display layout is chosen by shifting the
x-position.
• When no markers are displayed, the cursor
keys are set for changing the time base or
input sensitivity when no keys are pressed
during 10 seconds.
TM
SIGNAL SCREEN
Werbung
Inhaltsverzeichnis
