Zeversolar Eversol serie Anleitung Seite 35

The pin assignment of RJ45 socket on the inverter as follows:
Pin1------- TX_RS485A
Pin2------- TX_ RS485B
Pin3------- RX_ RS485A
Pin4------- GND
Pin5------- GND
Pin6------- RX_ RS485B
Pin7------- +7V
Pin8------- +7V
Connecting the RJ45 plug:
a. Unscrew the cap nut on the RJ45 keystone socket;
b. Take out the RJ45 plug which accompanies the inverter, and unscrew it;
c. Guide the components of RJ45 plug over the network cable as follows;
No.
NOTICE!
The inverter can be destroyed by wrong communication wiring!
Internal components of the inverter can be irreparably damaged by wrong wiring
between the power wire and signal wire.
• Please check the wiring of the RJ45 connector before crimping the contact.
34
Description
A Cap nut
B Seal
C Threaded ring
D Clamp ring
E Gasket
F RJ45 connector
QTY Color
1 Black
1 Black
1 Black
1 Black
1 Black
1 Transparent
Installation and operating instructions