Zeversolar Eversol serie Anleitung Seite 24

4 Insert the stripped conductors L1, L2, L3, N and PE into the corresponding
terminals and tighten the screw with torque 05-1.2Nm using a 2.5mm screwdriver.
The ground wire must be locked in the "PE" position.
CAUTION!
The inverter can be destroyed due to the wrong wiring!
Please ensure that the polarity of the conductors matches the signs of the screw
terminals on the socket element.
5 Assemble the socket element, adapter and cable nut as shown below with a.
torque of 3-4Nm.
6 Insert the plug into the receptacle with the key aimed at the corresponding slot.
Finally rotate the coupling nut clockwise until you hear a click.
Installation and operating instructions 23