QIMMIQ Birdy Bedienungsanleitung Seite 30

1 Slide up to make the model ascend
2 Slide right to rotate the model right
3 Slide down to make the model descend
4 Slide left to rotate the model left.
5 Slide up to move the model forward
6 Slide right to make the model move forward/right
7 Slide down to move the model backward
8 Slide left to move the model forward/left

Gravity Sensor Mode (Optional in Menu)
Left
1 Holding the up arrow will cause the model to ascend until released. Once released, the model will
hover in place
2 Holding the right arrow will cause the model to rotate to the right. It will hold position when released.
3 Holding the down arrow will cause the model to descend. When the arrow is released, the model will
hover in place.
4 Holding the left arrow will make the model rotate left, it will hold position when released
Right
Press and hold within the designated side (Right side) to enable accelerometer-based control.
Press any place on the right side of the screen; tilt the mobile forward, the model will move
forward.