Noise And Vibration Declaration Statement; Accessories - Husqvarna K 970 III Bedienungsanweisung

Spindle, output shaft
Max. spindle speed with cutting blade 350mm (14in.), rpm
Max. spindle speed with cutting blade 400mm (16in.), rpm
Max. peripheral speed, m/s or ft/min
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
Equivalent sound pressure level at the ear of the operator, dB (A)
Equivalent vibration levels, a
Front/ rear handle 350mm (14in.), m/s
Front/ rear handle 400mm (16in.), m/s
Recommended cutting blade
dimensions
Cutting blade di- Max. cutting
ameter, mm/in. depth,
mm/in.
350/14 125/5
400/16 155/6
Noise and vibration declaration
statement
These declared values were obtained by laboratory type
testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
Sensor for Husqvarna Fleet Services
This product is compatible with the Husqvarna Fleet
machine sensor. The product can then be connected to
Husqvarna Fleet Services
1
Noise emissions in the environment are measured as sound power (L
2000/14/EC. The difference between guaranteed and measured sound power is that the guaranteed sound
power includes dispersion in the measured result and variations between different units of the same product
according to directive 2000/14/EC.
2
Equivalent sound pressure level, according to EN ISO 19432, is calculated as the time-weighted energy total
for different sound pressure levels in various working conditions. Reported data for equivalent sound pressure
level for the product has a typical statistical dispersion (standard deviation) of 1 dB (A).
3
Equivalent vibration level, according to EN ISO 19432, is calculated as the time-weighted energy total for vi-
bration levels in different work conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1m/s
1429 - 001 - 16.04.2020
1
dB (A)
WA
3
hveq
2
2
Blade speed rat-
ing, rpm
5500
4775

Accessories

™
, which is a cloud solution
2
.
K 970 III, K 970 III Res-
cue
4700
4300
90 or 18000
114
115
2
104
3.8/4.2
3.5/4.0
Blade center hole di-
Blade speed rat-
ameter, mm/in.
ing, m/s or ft/min
100 or 19600 25.4/1 or 20/0.79
100 or 19600 25.4/1 or 20/0.79
values are not suitable for use in risk assessments and
values measured in individual work places may be
higher. The actual exposure values and risk of harm
experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
™
that gives the commercial fleet manager an overview of
all products. For more information about Husqvarna
™
Fleet Services
K 970 SmartGuard
4700
N/A
90 or 18000
114
115
104
4.5/3.7
N/A
Max. blade thick-
ness, mm/in.
5/0.2
5/0.2
, refer to www.husqvarna.com.
) in conformity with directive
WA
33