BROTJE BBS 15 C Beiblatt Seite 16

GB
Adjustment of control unit
2.2 Adjustment by service RRG:
2.3 Adjustment of parameters of KBM:
16
• Press Info-button.
Then press key +/
▼
Initiate BMU-Parameter (Enduser).
• Select level OEM:
Press both keys ▼ and ▲ > for 9 sec. until the display shows
OEM-Code (level OEM).
• Type in OEM-Code:
Press ▼ / + / ▲ / - / +
• Select the desired program no. by pressing buttons ▲ or ▼.
• Set the desired value by pressing the + / - buttons.
The new value will be accepted after selecting the next program
no.
• Press the Info button for leaving the programming-level.
• Press keys ▲ or ▼, until P 1 appears in the display ( level Enduser).
• Select level OEM:
Press both keys ▼ and ▲ > for 9 sec. until the display shows
C (level OEM).
• Type in OEM-Code:
▼/▲/+/-/+
• Select the desired program no. by pressing one of the program-
ming-buttons.
• Set the desired value by pressing the + / - buttons.
The new value will be accepted after selecting the next program
no.
• Press the Info button for leaving the programming-level.
Wärmetauscher neue Revision
or +/▲ until the display shows
274045-05 05.13