Using The Truck For The First Time; Breaking In The Truck - Manutan A170148 Bedienungsanleitung

1.4. Standard version specifications
1.4.1. Performance data for standard trucks
Item Description
Q Load capacity
C Load centre
Travel speed
Lifting speed
Lowering speed
Maximum gradeabil-
ity, S2 5 min.
Service brake
Service weight Incl. battery
Operator/load
Axle loading, laden
Axle loading, Operator/load
unladen
Motor
Tyre type, operator/load side
Tyre size, operator side
Tyre size, load side
Battery
Voltage/rated
capacity (5h)
Sound level at operator's ear
1.4.2. Dimensions
Item Description
X Load distance
Y Wheelbase
h3 Lift height
b11 Tread Load side
h13 Fork height Lowered
Height of tiller
h14 arm in operating
position
L1 Overall length
L2 Length to face of forks
b1 Overall width
s Thickness
e Fork dimensions
L Length
b5 Fork spread
m2 Ground clearance
Wa Outer turning radius
1000×1200 pallet
crossways
Ast Aisle width ˚
800×1200 pallet
lengthways
˚Including safety distance A = 200 mm
A170148 A170149
1500
600
Laden 3.5
Unladen 4.0
Laden 10
Unladen 10
Laden /
Unladen /
Laden 2
Unladen 6
Electromag- Electromag-
netic
140
539/1098 565/1130
side
110/30 155/40
side
Drive 0.65
Lift Manual
PU/PU
Ф210×70 Ф210×70
2-Φ80×60
2-Φ78×60
(Φ74×88)
Mainte- Mainte-
Type nance-free nance-free
battery battery
2×12/30 2×12/65
Weight 9.5×2 22.5×2
74
A170148 A170149
883/946 889/946
1152/1215 1261/1205
115
410 (535) 410 (535)
85 (75)
Min 715
Max 1280
1588
438
558 (685) 568 (685)
50
Width 150
1143
558 (685) 560 (685)
35
1415
1669
1869
Unit
1500 kg
600 mm
4.5 km/h
5 km/h
0.029 m/s
0.038 m/s
0.046 m/s
0.033 m/s
2 %
6 %
netic
195 kg
kg
kg
0.65 KW
0.84 KW
PU/PU
mm
mm
V/Ah
kg
74 dB(A)
Unit
mm
mm
115 mm
mm
80 mm
790 mm
1225 mm
1638 mm
488 mm
mm
50 mm
150 mm
1150 mm
------------------------------------------------------------------------------------------------
mm
30 mm
1485 mm

2.1. Using the truck for the first time

Only operate the truck using a battery power supply. Rectified AC current will damage the electronic
1739 mm
components. Cable connections to the battery (tow leads) must be less than 6 m.
Preparing the truck for operation after delivery or transport
Procedure:
1939 mm
• Check the equipment is complete.
• Check the hydraulic oil level.
• Install the battery if required, (see "4.4 Battery removal and installation"). Do not damage the
battery cable.
• Charge the battery, (see "4.3 Charging the battery"). When the truck is parked, the surface of
the tyres will flatten. This flattening will disappear after a short period of operation.

2.2. Breaking in the truck

For the best performance, we recommended that the machine is operated with light loads the first
few times it is operated. In particular, the requirements given below should be observed once the
machine has been operated for a total of 100 hours.
• The new battery must not be allowed to over-discharge when used in the early stages of its life
cycle. Please charge the battery when the battery level is at less than 20%.
• Ensure that the preventative maintenance tasks specified are completed thoroughly and with
due care.
• Avoid stopping, starting or turning suddenly.
• It is recommended that you complete oil changes and lubricate parts before the specified dates.
• Limited load is 70–80% of the rated load.
------------------------------------------------------------------------------------------------
A170148
A170149
2. TRANSPORT AND COMMISSIONING