Before First Use; Setting Up The Appliance; Heating The Appliance While Empty - Medion Micromaxx MD 16573 Bedienungsanleitung

8. Before fi rst use

8.1. Setting up the appliance

Ensure that all packaging materials have been removed from inside the appliance
and the interior of the door.
ATTENTION!
The screw-fastened cover in the interior of the oven is not
part of the packaging and should not be removed!
WARNING!
Check the microwave for any damage – e.g. if the
door is crooked or bent, door seals and other seals
are damaged, hinges and the closing mechanism are
defective or loose, or if the interior of the appliance
or the door are dented or damaged. If you discover
any damage, do not use the microwave. In this case,
please contact the Medion Service Centre.
• Do not place the microwave near to any heat sources, in a location prone to
wetness or high humidity, or in the immediate vicinity of flammable materials.
• The feet must not be removed.
ATTENTION!
The microwave has been designed for household use and
may not be used outside!
• Connect the microwave to a convenient and easily accessible 230 V~50 Hz
earthed power socket.

8.2. Heating the appliance while empty

Before using the microwave, you must first heat it up whilst empty in order to
remove any manufacturing residues. Turn on the appliance without any food and
without accessories as described below in grill mode:
 Open the door and remove any remaining packaging or accessories from the
oven.
Close the door.
 Press the
 Press the
button and then turn the control knob
a cooking time of 10 minutes (10:00).
 Press the
button again to start the heating process.
144 of 164
button until G-1 is shown on the display.
until you have set