Appendix C: Supported Dvi Resolutions; Appendix D: Software Upgrade; Software Upgrade Search Via User Interface; 2) 3.Am Search And Upgrade Mode - Durabase 40 DB 906 II Bedienungsanleitung

Appendix C: Supported DVI
Resolutions
When connecting devices to your TV's connectors by
using DVI to HDMI cables (not supplied), you can refer
to the following resolution information.
Index Resolution
1
640x400
2 640x480
3
800x600
4 832x624
5
1024x768
6 1152x864
7
1152x870
8 1280x768
9 1280x768
10
1280x768
11 1280x960
12 1280x1024
13 1360x768
14 1400x1050
15
1400x1050
16 1400x1050
17 1400x900
18
1600x1200
19 1680x1050
20 1920x1080
21 1920x1080
22 1920x1200
23
1920x1200
24 480i-480p
25 576i-576p

Appendix D: Software Upgrade

• Your TV is capable of  nding and updating new
software upgrades over broadcast channels.
• For broadcast channels search, the TV looks at the
available channels stored in your settings. So before
the software upgrade search, it is advised to auto
Frequency
search and update all available channels.
70Hz
1) Software upgrade search via user
60Hz-66Hz-72Hz
interface
-75Hz
• It is possible to manually to check if there is a new
56Hz-60Hz-70Hz-
software upgrade for your TV set.
72Hz -75Hz
• Simply navigate on your main menu. Choose
Settings and select Other Settings menu. In Other
75 Hz
Settings menu navigate on to the Software Upgrade
60Hz-66Hz-70Hz-
item and press OK button to open Upgrade Options
72Hz -75Hz
menu.
60Hz-70Hz-75Hz
• In Upgrade Options menu select Scan for upgrade
75Hz
and press OK button.
• If a new upgrade is found, it starts to download the
60 HzA
upgrade. A progress bar indicates the remaining
60 HzB
download progress. When the download completes
75Hz
successfully a message is displayed for reboot to
activate new software. Press OK to continue with
60Hz-75Hz
the reboot operation.
60Hz-75Hz

2) 3.AM search and upgrade mode

60 Hz
• If Automatic scanning in Upgrade Options menu is
60 HzA
enabled, the TV wakes up at 03:00 and searches
the broadcast channels for new software upgrade. If
60 HzB
new software is found and downloaded successfully,
75Hz
with the next power up the TV opens with new
65Hz-75Hz
software version.
60 Hz
Note on reboot operation: Reboot is the last step
in software upgrade operation if download of new
60 Hz
software is  nished successfully. During reboot TV
60 HzA
makes  nal initializations. In the reboot sequence
panel power is closed and front led indicates the
60 HzB
activity with blinking. Around 5 minutes later TV
60HzA
restarts with new software activated.
60Hz
• If your TV fails to restart in 10 minutes, unplug power
60Hz for 10 minutes and re-plug again. TV should open
with new software safely. If you still can not get
50Hz
TV working, please kindly repeat unplug and plug
sequence a few times more. If your set still can not
operate, please call the service personnel to  x the
problem for you.
Caution: While the LED is blinking during reboot do
not unplug your TV's power. Doing this may cause
your TV not to re-start again and can only be  xed
by service personnel.
- 59 -