Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Function and features
The flow monitor monitors liquid media. It senses whether there is a
preset flow (= medium flows) or not (= medium does not flow) and
provides a switching signal.
Installation
1. Weld the adapter into the
pipe. The installation depth
depends on the pipe wall thick-
ness. The bush should be insert-
ed so that the figure correspond-
ing to the wall thickness is flush
with the outside pipe wall and
can be seen from all sides (fig.
1a).
In the case of horizontal pipes
the bush should be welded at an
angle of 45° (fig. 1b).
To avoid malfunction a minimum
distance between the flow moni-
tor and bends, valves or such like
must be observed (fig. 3).
• Min. 5 x pipe diameter
upstream,
• Min. 3 x pipe diameter down-
stream.
8
1a
1b
1c
min.
5 x D
D
10
8
6
10
8
6
4
4
4
min.
3 x D
Werbung
Inhaltsverzeichnis
