Care And Maintenance - Emmaljunga First Class 0+Base Adapter Go Double Gebrauchsanweisung

Care and maintenance

General care
• Should the adaptor become wet, dry it promptly. Make sure the adaptor is completely dry before storing.
• Be careful during transportation and storage of the product as the surface of the adaptor is fragile.
Scratches that arise after sale are not a justifiable complaint.
Routine inspection
• Regularly clean the adaptor's metal parts, dry them and lubricate all joints on the chassis.
• When the adaptor is used during the winter time, cleaning of the pram should be carried out at least once
a week. Lack of maintenance could cause corrosion. Should corrosion on the surface occur, which is a
possibility, you are required to remove this with a corrosion cleaning agent.
Check before use that:
• All locking devices are functioning properly between the car seat and Adaptor and between the Adaptor
and chassis.
• All rivets, nuts and bolts are firmly tightened and not broken.
• All plastic parts are not cracked or broken.
PLEASE OBSERVE!
• When in need of servicing with original parts and when other technical issues arise that require a pro-
fessional decision, always get in touch with the retailer from which your Emmaljunga product was pur-
chased.
20
Manual First Class 0+Base Adapter Go Double v. 1.1