Important Safety Information - Emmaljunga First Class 0+Base Adapter Go Double Gebrauchsanweisung

Important safety information

Please read this information carefully before use of the pram and save the instruction manual for future refe-
rence. Always read the pram manual together with this manual.
Failure to follow the instructions may cause
serious injury to your child and/or the product.
This manual is intended for the Emmaljunga First Class
to attach the Emmaljunga First Class0+Base car seat to a Go Double Adaptor on an Emmaljunga Super Viking
chassis.
WARNING No other car seat except the Emmaljunga First
Class
WARNING The Travel System Adaptor is only intended to be
attached on to a Go Double Adaptor on an
Emmaljunga Super Viking chassis.
WARNING For usage of the First Class
combination with Go Double you must read
the corresponding manual for the car seat and the
Go Double Adaptor. For usage of the chassis you
must read the corresponding manual for the pram.
Safety information that is included in these three
manuals should be applied in conjunction with the
information in the Emmaljunga First Class
Adaptor manual.
WARNING This product is only compatible with the
Emmaljunga First Class
Double Adaptor on the Emmaljunga pram Super
Viking. Never use the Travel System Adaptor on
products other than those stated.
WARNING Never leave your child unattended.
WARNING Do not let your child play with this product.
WARNING This product is not suitable for running or skating.
WARNING Accessories and spare parts which have not been
approved by the manufacturer cannot be used.
WARNING Never lift the Emmaljunga First Class
seat when it is attached to the Adaptor/chassis.
WARNING Always position the Emmaljunga First Class
carseat and the Adaptor so that the child's feet
are facing towards the pram handle.
WARNING Never use the product if parts are missing or
broken.
WARNING Make sure before use that the Adaptor and the
Emmaljunga First Class
correctly assembled and that all locks are locked
into position.
WARNING Never detach the Adaptor from the chassis when
the car seat is secured on it.
18
WARNING
is to be attached on to the Adaptor.
0+Base
Adaptor for Go Double which is required in order
0+Base
car seat in
0+Base
car seat and the Go
0+Base
car seat are
0+Base
First Clas
s 0+Base
Manual
0+Base
car
0+Base
0+ Base
Adapter Go Double
v. 1.1