Inateck P7 Bedienungsanleitung Seite 5

Enter Setup
Exit with Save
2) Pair one or more scanners with one USB adapter
a) Plug the adapter into your computer
b) Scan "Enter Setup" barcode
c) Scan the barcode " Pair one or more scanners with one USB adapter", and get the
Inateck P7 as close as possible to the USB adapter (within 2 meters).
d) A three-chord sound (from low to high) indicates a successful pairing. Once there is a
long high tone, it means the pairing fails and a repeated operation is needed.
To pair more scanners with the adapter, please operate as the steps mentioned above.
3) Pair one scanner with multiple USB adapters
a) Scan "Enter Setup" barcode
b) Scan the barcode "Pair one scanner with multiple USB adapters", and get the Inateck P7
as close as possible to the USB adapter (within 2 meters)
Pair one or more scanners with one USB adapter
（*）Wireless Adapter Mode
EN
3