Inateck P7 Bedienungsanleitung Seite 13

Inventory Mode
EN
Users may use inventory mode to keep scanned barcodes in the buffer of Inateck P7, and
upload them to computer in batches. Under inventory mode users are not restricted to the
time and location when upload data. Of course, history data can be cleared in buffer. More
details about inventory mode are as below.
1. Scan the barcode to enter Inventory Mode
Enter Inventory Mode
2. Scan the barcode to return to Common Mode
（*）Return to Common Mode
3. Scan the barcode to clear data in buffer (for Inventory Mode only).
Clear Data in Buffer(for Inventory Mode only)
4. Scan the barcode to upload data from buffer (for Inventory Mode only)
Data Upload (for Inventory Mode only)
5. Scan the barcode to upload the number of scanned barcodes (for Inventory Mode only)
Upload the Number of scanned barcodes
(for Inventory Mode only)
Note:
1) To use inventory mode, users just need scan "Enter Inventory Mode" barcode; and do
not have to scan "Enter Setup" barcode before that.
2) To end inventory mode, users just need scan "Return to Common Mode" barcode.
Frequently Used Barcodes
Enter Setup
Exit with Save
Exit without Save
11